Wholesale Oil Separator In Air Compressor Factory 39760590 Filter

Tips：Because there are more 100,000 types of air compressor filter elements, there may be no way to show one by one on the website, please email or phone us if you need it.

In dusty mines or workshops with strict temperature control, each operation of the oil and gas separation filter element affects the production cost. The innovation of Part Number 39760590 lies in that it uses polyester nanofibers instead of traditional glass fibers. This material, which was once used in artificial blood vessels, enables the filter element's lifespan to exceed 8,000 hours while reducing the starting pressure difference by 40% - just like fitting the compressor with "low-resistance sports shoes".

External filter element replacement

1. Shut down the machine and close the air compressor outlet valve;

2. Open the drain valve and confirm that the system pressure is zero;

3. Remove the old filter element and install the new one (pay attention to the cleanliness of the sealing surface).

Internal filter element replacement

1. Safety preparation

Shut down → Close the outlet valve → Open the drain valve → Verify that the pressure is zero;

2. Pipeline disassembly

Disconnect the air supply pipe above the oil-gas separator and the pipe from the pressure maintaining valve to the cooler;

3. Separator disassembly

Remove the return oil pipe → Unfasten the bolts of the oil-gas separator cover → Remove the upper cover;

4. Filter element replacement

Remove the old filter element → Clean the rust and dirt inside the separator → Install the new filter element (make sure the bottom gasket is aligned);

5. Reassembly points

The return oil pipe must be inserted into the groove at the bottom of the filter element to avoid oil residue;

Tighten all pipeline and cover bolts in the reverse order.